Frequently Asked Questions

WeatherStrong cabinet boxes are factory built from 3/4” thick All-Weatherboard™ composite material. This is a waterproofed MDF board clad with a thermo-fused laminate finish. Cabinet doors, drawer fronts and decorative cover panels are made from solid 5/8” High Density Polyethylene, also known as HDPE. Click here to view all the doors styles and finishes available.

WeatherStrong Cabinetry is manufactured and shipped out of our state of the art facility in Bartow, Florida.

To find your nearest location to buy WeatherStrong cabinets, click here.

Our All-Weatherboard™ features consistent color all the way through the material. Unfortunate scratches that break through the surface will be less noticeable.

Most outdoor grills and accessories are stainless steel, our metal hardware is even better at all stainless steel and is top rated for outdoor use!

Oceanfront environments with salt air and sea spray will require regular maintenance and cleaning to prevent rust from forming on the handles, hinges and drawer runners. Clean stainless steel surfaces several times a month to keep the chemical reaction from the salt from gaining a foothold on the hardware.

Any built-in, heat generating appliance MUST be installed with its own manufacturer supplied insulated jacket or liner and any installation which occurs without this required item will result in irreparable damage to your cabinetry and will void the warranty.

Cabinet sides and backs that will be exposed to direct sunlight and other weather elements MUST be covered by a matching end panel in coordinating High Density Polyethylene (HDPE). Failure to install these protective panels will void the cabinet warranty.

Yes! WeatherStrong cabinetry is built to handle any conditions outside, so installation indoors is definitely fine. WeatherStrong cabinetry is the perfect solution to even the dampest of areas like basements and laundry rooms.

Snap on matching toe kick is optional for on-site modification and installation and must be purchased separately. The available size is 6” x 96”.

If your cabinets are installed with the end panels against the wall, a minimum ¾" filler panel is suggested to prevent the full overlay door or drawer fronts against possibly rubbing against the wall.

Yes. Our cabinets are a frameless “European” design so all doors and drawer fronts are considered full overlay since they cover the entire face of the cabinet.

Yes. Designer Finishes are recommended for indoor wet or dry areas such as laundry rooms and garages or for any outdoor space where surface temperatures do not exceed 265° F. In areas where temperatures dip below freezing, you may find things more desirable with installation under cover.

No. Altering the surface color will restrict airflow within the product and increase the amount of heat absorbed by direct sunlight, thus voiding the warranty.

WeatherStrong Cabinetry provides a limited lifetime warranty against defects in material and workmanship under normal residential use. You’ll find the full warranty for your review by following this link.

Wash WeatherStrong cabinets with water and a soft cloth or sponge. A mild dishwashing liquid can be used if needed. For tougher to clean spots, use Simply Green All-Purpose Household Cleaner. A soft bristle brush may be used if needed. Wipe pulls and hinges with a damp cloth and mild detergent. Immediately wipe dry with a lint free cotton cloth.

Due to the varying types of wall/floor construction where cabinetry will be installed, WeatherStrong Cabinetry does not ship installation hardware. Review our installation guide found here for a list of suggested/required items. To secure cabinets together, a 1¼" stainless steel screw is used – we do offer a kit for this: WSSS1.25-Screw Kit.

Yes. WeatherStrong cabinets can support granite, marble, quartz, tile, or other typical surfaces. Be sure to consult the supplier for recommended maintenance practices to keep the countertop looking its best.

You have 72 hours from delivery to inform us of any damages to items.